Mobile Locks, Mockupancy and More: Make the Most of your Smart Home Security

Written by Crystal Watts on October 14, 2015


Your Control4 system means more than just convenience—it means safety, as well. Use your automated home to monitor security cameras, control your security system, and even simulate occupancy while you’re away. 
 

Pretend you’re home when you’re not.


Have you ever used those appliance timers to turn lights on and off while you’re gone? They’re not the easiest to set up, and their predictability (and limited functions) might fool Abbott & Costello, but not many other intruders. Enter Control4’s Mockupancy feature.

Mockupancy is a type of “occupancy simulation.” Control4 can keep track of all lighting, blinds, and video entertainment while you’re at home. When you leave the house and put Control4 in “Away” mode, Control4 will replay those behaviors throughout your automated system (using slightly randomized times). To an outside observer, it will look just like you’re home, watching your favorite shows and turning lights on and off at the expected times.

Your Control4 Dealer can set up custom programming or keypad buttons to start recording and playback. Your dealer can also link your security system with Mockupancy so that the system continually learns while security is disarmed and automatically plays back the simulation while security is armed. If using keypad buttons, the button LED colors are automatically set red for recording, green for playback, and blue for idle.
 

Make your security panel smart—and sexy. 


Whatever security system your home uses, Control4 gives you an easy-to-use interface for arming, disarming, and controlling it. You can send a panic alert, view the history of all logged security events, and even directly control security sensors.

The "Arm/Disarm" button starts out green when disarmed, and with a simple press, changes to red. You are then given a countdown to exit the building before the alarm system is armed. Upon re-entry, a delay timer begins counting down. Select the red "Press to DISARM" button in the middle of the screen, enter your security PIN, and the system is deactivated. It's also easy to send a fire, police or panic alert from your touch screen, even while the security system is disarmed. 


Manage the state of your security zones. 


It's great to be able to see the state of your security system as a whole, but what about keeping an eye on individual security zones? You can do that, too! Easily view the status of each security zone in your house, and if a device is controllable by the Control4 system (such as a front gate), you can control it from the same screen. Your Control4 system records each security event, including alarms, sensor detections, and arming and disarmings.
 

Your house, locked—and loaded with features.


You can lock and unlock any connected door lock, as well as keep track of who accesses the locks, and when, with personalized codes that you can set and control.  You can even schedule specific access times and temporary codes to visitors, remotely lock and unlock doors from any web-enabled device, or program all doors to lock at once when you put the rest of the house to sleep.
 
At Control4, we are always upping the ante in intelligent security and continuously aim to provide customers with more functionality and customization for their automated homes. To learn more, be sure to contact your dealer or see more about what our security solutions offer. Or see what else we just rolled out with our best operating system yet. 

 

Category Security