Using the Screen Saver agent

Use the Agents view to set up the Screen Saver agent.

Prerequisites

Ensure that the devices you will use to set up a screen saver and store your photos (for example, a network-attached storage device) are attached to the Control4 system are attached to the primary controller. If you use a USB device, ensure that it is formatted to FAT 32.

To set up the Screen Saver agent:

1. Start Composer Pro and connect to a Director.

2. Click Agents.
3. (First time only) Click Add to add the Screen Saver agent to the project.
4. Select Screen Saver, and then click OK. The next time you want to create a Screen Saver, click the Screen Saver item in the Agents pane, and then click New.
5. From the drop-down menu, select the File Storage Location.

6. Click the Media view.
7. Click Screen Saver in the Media pane.
8. Click Add to scan and add new photos to the Screen Saver pane from the device you selected in the Network Storage Location box.
9. To set up a custom screen saver on the Navigators, see also:

• “Setting up the photo screen saver”

• “Setting up a custom screen saver”

• Control4 System User Guide