Setting up a Wireless Thermostat
Use the System Design and Connections views to set up a Control4 Wireless Thermostat.
Prerequisites
- Ensure that your project has a Control4 controller added to the project tree and is identified on the Control4 system.
- Ensure that the thermostat is installed at the wall as directed in the Control4 Wireless Thermostat Installation Guide available on the Dealer Portal.
- Ensure that the Control4 Wireless Thermostat is added to the project tree.
To configure a Wireless Thermostat for the Control4 system:
- To add the driver and identify the device see “How to add devices to a project.” Ensure that the Residential Thermostat driver is added to the project tree (unless you’re using a third-party thermostat).
- To program the schedule, see “Programming the Control4 Thermostat schedule.”
- To set up advanced properties, see “Using the Wireless Thermostat advanced properties.”
