PREREQUISITES

  • Control4 system running OS 3.2 or higher.
  • For the Wi-Fi model (C4-VDB-W), a 16-24V AC, at least 10VA (10W), doorbell transformer (not included) is required to power the VDB.
  • If you want to use the external chime feature, a mechanical doorbell chime, doorbell transformer, and standard doorbell wiring ( 18-22 gauge 2-conductor) between them are required. Digital doorbell chimes are not supported.
  • Sufficient Wi-Fi coverage outside at the doorbell location (-65 dbm or better for best results).

CONTENTS

  • Video Doorbell (Wi-Fi) (C4-VDB-W)
  • Mounting bracket
  • Wood screws (3), anchors (2), and spare wire terminal screw
  • Set screws (2) and Allen-type wrench

IMPORTANT NOTES AND CAUTIONS

Important! Installation and maintenance should only be performed by qualified technicians.

Important! The VDB should only be connected to a properly secured network.

Caution! Use with a power supply that is UL listed and Limited Power Source (LPS) certified. The power supply should bear the UL listed and LPS marks. The power supply should also meet any safety and compliance requirements for the country of use. The power supply should be properly grounded.

Go to INSTALLING THE BRACKET