Veranda 3 IP Commands

Network Port: 60028

Note: -__.These commands are only compatible with SunBrite Veranda 3 models: SB-V3-55-4KHDR-BL, SB-V3-65-4KHDR-BL, and SB-V3-75-4KHDR-BL. For other Sunbrite models, reference Support tab of the product page on SnapAV.com

Note: -__.You must enable the Control API port setting in the TV first.

Note: -__.The TV must be powered on and connected to the local network for initial setup with SDDP.

IP Commands

Note: -__.Command strings must be terminated by a carriage return. You will not receive a confirmation response.

Power

  • ON

Note: -__.The ON command is only supported when using the official Control4 driver. You must use a WakeOn LAN (WoL) packet when using other control systems.

  • OFF

Input Toggle

  • INPUT_TOGGLE

  • TV_VIDEO

  • Channels = 200001

  • HDMI 1 = 200002

  • HDMI 2 = 200003

  • HDMI 3 = 200004

  • HDMI 4 = 200005

  • AV = 200006

Menu

  • INFO

  • GUIDE

  • MENU

  • CANCEL

  • UP

  • DOWN

  • LEFT

  • RIGHT

  • ENTER

  • RECALL

  • PREV

  • PROGRAM_A

  • PROGRAM_B

  • PROGRAM_C

  • PROGRAM_D

  • CLOSED_CAPTIONED

  • PAGE_UP

  • PAGE_DOWN

  • HOME

  • ALL_APPS

Digits

  • NUMBER_0

  • NUMBER_1

  • NUMBER_2

  • NUMBER_3

  • NUMBER_4

  • NUMBER_5

  • NUMBER_6

  • NUMBER_7

  • NUMBER_8

  • NUMBER_9

  • STAR

  • DOT

  • HYPHEN

  • POUND

Volume

  • MUTE_ON

  • MUTE_OFF

  • MUTE_TOGGLE

  • PULSE_VOL_DOWN

  • PULSE_VOL_UP

  • SET_VOLUME_LEVEL

Tuning

  • SET_CHANNEL

  • PULSE_CH_UP

  • START_CH_UP

  • PULSE_CH_DOWN

  • START_CH_DOWN

  • SKIP_FWD

  • SCAN_FWD

  • SKIP_REV

  • SCAN_REV

  • PLAY

  • STOP

  • PAUSE

Status Query

  • GET_VOLUME_STATUS

  • GET_MUTE_STATUS

Keep Alive

  • KEEP_ALIVE