EA-300-LYNK

Episode Lynk 300 Series Audio Casting Interface

The Episode Lynk 300 Series turns any amplifier, receiver, or audio matrix into a streaming interface for AirPlay®, Spotify Connect®, Chromecast®, or Bluetooth using a 3.5mm or optical connection.

Note: -__. A 3.5mm optical audio adapter is included in the box.

The Lynk uses the native volume control of the device that’s streaming the audio. No separate app is required.

Installation

Connect the Lynk to the network using Ethernet or Wi-Fi. Use the Aux/Optical out to connect to an amplifier, receiver, or audio matrix. Once these connections have been made, connect the included power supply.

Copyright © 2023, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.