3 Bugs Resolved
This is the list of bugs resolved over the course of our OS 3.3.3 release.
|
ZWAVE-593 |
zwave common lights do not function, or function occasionally, or function with long delays |
|
DC-6935 |
Diagnostics update fails when windows username has a . in it. |
|
DC-6556 |
HTML tab inside driver lose focus |
|
DC-6941 |
Upgrade Report showing HC250 is OS3 compatible on CP 3.3.2.651293/3.3.3.654275 |
|
DC-6907 |
Altering invalid Zigbee mesh does not send correct commands |
|
ZWAVE-635 |
Unable to load project with Z-Wave setting error will be shown in composer |
|
ZWAVE-630 |
Update time in metrics is not correct if clock was synced during serial api update |
|
ZWAVE-617 |
When zpc is restarted, driver will not get updated "Network Status" from "State" topic |
|
ZWAVE-616 |
After reboot, component update or project save, uicmmd will remain in status "Not Ready" |
|
SYS-8860 |
Downgrading CORE from USB3.0 to USB2.0 (Zigbee radio degraded by USB3.0 devices) |
|
SYS-8635 |
audio3client enabled on core controllers; no PID |
|
SYS-8424 |
ioserver: pulse relay timer is assumed to be hex instead of decimal |
|
SYS-7255 |
Randazzo - CORE Controller: getting a blank screen with no signal |
|
QT-1408 |
Control4 Onscreen: OSD doesn't load, gets as far as the Control4 Logo |
|
QT-1403 |
OSD: Rooms favorites do not always match other navigators |
|
QT-1383 |
CORE 3 - Onscreen locked up |
|
QT-1367 |
CORE 3 onscreen: Primary Controller Restarted, but the CORE 3 OSD did not reconnect (locked up) |
|
QT-1365 |
CORE 1 OSD locks up |
|
QT-1342 |
CORE navigators locked up |
|
QT-1273 |
CORE 5 OSD no control - doesn't select watch source then went blank |
|
LIGHT-3744 |
configurable keypad Driver Indicates Power Measurement - Causes Director SEGV |
|
LIGHT-3725 |
Advanced Lighting Scene - can't scroll to some loads |
|
LIGHT-3531 |
Advanced Lighting editing scene page blinking |
|
LIGHT-3481 |
Color On Mode: Dim-to-Warm/Color Fade - proxy NOT sending SET_COLOR_TARGET on ramp to off state |
|
LIGHT-3396 |
Light proxy: Properties overlap when enabling color (supports_color/cct capabilities) for a driver |
|
LIGHT-3357 |
Dimmer load group is missing brightness presets connections |
|
INTEST-2170 |
Adding a switch to a lighting scene checks the ramp rate. |
|
EMCOMM-1803 |
Core controllers zigbee fails when ramping commands to ir controlled devices. |
|
EMCOMM-1696 |
Message bus: Meshstate is published after zserver shutdown |
|
EMCOMM-467 |
Zigbee: OTA Update: zb:otaImageInfo responds with image info from a different device |
|
EL-8461 |
M4 Firmware: Multiple Relay Triggers in a Script Don't Execute on CORE5 |
|
DRIV-9044 |
Door sensor alarm does not translate |
|
CS-11986 |
Validate History Agent Attributes are in the APNS Notification |
|
CS-11806 |
Phone intercom session stays active on T3 when ended from phone |
|
CS-11773 |
Notifications - Fix existing bugs |
|
CON-260 |
Composer wont list controller input sources |
|
CI-22743 |
The Device Administrator "properties" API assumes that property values will not contain spaces |
|
CI-22555 |
Camera Navigation Flip failing for all cameras (EA-3) |
|
CI-22539 |
Signing a T4 release apk can theoretically result in the wrong apk being delivered, but correctly signed. |
|
CI-22532 |
Touchscreens not showing video when motion is detected |
|
CI-20764 |
T4 Back light coming on randomly while in night mode. |
|
C4OS-9985 |
Hebrew and Arabic languages not available in Composer beginning with 3.3.0 for Yocto devices |
|
C4OS-9950 |
Force_auto_update agent not respecting minimum_OS_version tag and/or minimum_auto_update_version tag on OS 3.x |
|
C4OS-9920 |
CORE-X: string.pack returning incorrect value |
|
C4OS-9821 |
Director process crashing randomly |
|
C4OS-9800 |
lua_gen: libcurl command fails on 3.3.1+ Core controllers |
|
C4OS-9752 |
Drivers with SINGLETON_ID in driver_xml should not be allowed to be installed twice |
|
C4OS-9539 |
Resolved - pending verification of 3.3.3. CA-10: Primary Controller Randomly restarted (Crashed/Restarted) |
|
C4OS-9468 |
Waiting on Customer Test: Core-5 running OS 3.3.2.643965 keeps restarting on it's own. |
|
AV-9010 |
Core5 DSP settings for digital outputs do not persist after reboot |
|
AV-9005 |
Discussions: T4 Intercom Issues showing offline in OS 3.3.3 |
|
AV-8997 |
History Agent only returns 1 result to mobile apps |
|
AV-8954 |
History Notifications - Device & Device-Type "All" filters are being applied to all devices or device-types |
|
AV-8952 |
History Notifications - Device "All" filter should override specific device/event filters |
|
AV-8860 |
Extend history agent API for event registration in C4LibDriverBases |
|
AV-8844 |
Director crashing in intercom.c4l |
|
AV-8810 |
Core5 has too many "Null Modem Enabled" toggle buttons in the driver UI |
|
AV-8798 |
Now playing banner missing on UI when selecting Tuner Stations |
|
AV-8796 |
Front-end EDID Capture, Reset Button Dialog |
|
AV-8686 |
Command PLAY_DOOR_CHIME does not change anything |
|
AV-8631 |
Attempt to restart freeswitch restarts all processes |
|
AV-8574 |
DTMF not operating through programming |
|
AV-8375 |
Qobuz Driver and Tidal Hi-Res - When using high bitrate, multiple SEEK commands causes a skip to the next track |
|
AV-8148 |
DS2 - Alternate camera will not display on C4 app under intercom |
|
QT-1412 |
Secondary Core1 OSD connects and disconnects to director in a loop |
|
OVRC-21729 |
Devices - Extra Padding in Activities and Notes Pages |
|
OVRC-21496 |
Devices - Image Placeholder not visible on Core's Device Details page if Dark Theme setting is disabled |
|
LIGHT-3709 |
Composer pro 3.3.2 crashing on windows when stop brightness change is selected. |
|
LIGHT-3704 |
After updating OS from 3.2.4 to 3.3.x, Control-Control sends level 0 when turning ON a KNX Switch |
|
LIGHT-3631 |
Composer Dimmer Properites: No brightness level configuration option when adding a new Brightness Preset |
|
LIGHT-3612 |
Blind proxy - programming "open" & "close" commands do not work |
|
LIGHT-3576 |
Centralized relay Loads not controlling via UI after 3.3.1 update |
|
LIGHT-3562 |
Light Proxy - Ensure that default brightness rate is within min/max range |
|
LIGHT-3420 |
Advanced Lighting agent: time based settings are not being fully highlighted when user edits them |
|
LIGHT-3325 |
advanced lighting agent locks up for 30 seconds or longer when enabling flash option on each load. |
|
LIGHT-1976 |
Improve Advanced Lighting System configuration interface in Composer Pro ALS agent |
|
C4OS-9979 |
C4 Ping memory leak |
|
AV-8960 |
TV Proxy - transports blank after driver update |
|
AV-8638 |
MoIP - Analog source bound to Audio TX won't show available to Audio RX rooms |