Verifying control and AV connections

Use the Control & Audio Video Connections pane to verify connections, and use the System Design view to verify room connections.

To verify all Control and AV connections by checking the connection list:

  1. Click Connections, and select the project from the project tree. The Control & Audio Video Connections pane displays.
  1. Carefully go through all your Control and AV connections by verifying each connection in the pane.

To verify all Control and AV connections by checking room properties:

  1. Start Composer Pro and connect to a Director.
  1. Click System Design.
  2. Select a room in the project tree.
  3. Click the List View tab. On the List View tab check whether your AV devices are accessible in the room. If an AV device is in a room and in your project; but if it is not in the view, see “Connect and verify devices.”