Program the SR-260 programmable buttons

On the system remote control SR-260, you can program six buttons (Red, Green, Yellow, Blue, *, and #) to perform programmed activities. You can program these buttons to execute any of the AV device’s macros or IR codes or they can be programmed by room.

To program the SR-260 programmable buttons:

  1. Ensure that you have the following devices in your project:
    • Controller
    • System remote control SR-260
    • An AV device to be controlled
  1. In Composer Pro click Connections.
  2. Click the Network tab. Ensure that the controller and the remote are both network identified.
  3. Program the programmable buttons (Red, Green, Yellow, Blue, *, # or Custom 1/2/3) either based on the selected AV device or the selected room.

Based on AV device:

  1. Click System Design.
  1. Select an AV device to display the device’s Properties page.
    2. CompPro_SysDes_TelevisionProps_2.3.0.jpg
  1. On the device’s Properties page, select Code or Macro for the button you want to program, and then select a code or macro from the drop-down list.
  1. Edit the Help text as needed, and then select Set. 

    2. Note: Help text describes custom programming to users in the House option in any of the Navigators. 

    Example: (1) In System Design view, select Disc Changer. (2) In the Red button, select Code. (3) From the drop-down list, select Subtitle. (4) Select the Set button to create a Subtitle button. 

Based on room:

  1. Click Programming.
  1. Select a room in the Device Events pane.
  1. Select the Commands radio button in the <Room> Events pane.
  1. Use the drop-down menu to select a command or button (example, Blue Button or Custom 1/2/3).
  1. In the Actions pane, build the script using the items to program the actions in the selected room when the selected command or button is used.