Program a button to add a room to another room’s music session

Use the Programming view to use a keypad button to play music in additional rooms. 

Example: The example in this section uses a 6-Button Keypad for the Theater room. When you press Button 3, music starts playing in the Bedroom as well as the Theater room.

Prerequisites

• Ensure that a 2, 3, or 6-Button Keypad is installed as directed in the Control4 2, 3, or 6 Button Keypad Installation Guide.
• Ensure that your project has an audio end point, such as Speaker Point, added and identified on the network.

To program a button to add another room's music session:

1. Start Composer Pro and connect to a Director.

2. Click Programming.
3. In Programming on the Device Events pane, select the 6-Button Keypad.
4. In the 6-Button Keypad Events pane, press Button 3, and then select the Press radio button.
5. In the Device Actions pane, select Digital Media.
6. Click the Commands tab.
7. Use the pull-down menu to select the Theater room as the Selected Room. Select the Add Rooms radio button.
8. Check the box next to Bedroom to indicate that this is the room that is going to join the music session.
9. Drag the green arrow in the Digital Audio Actions pane to the Script pane.
10. Click Execute.