Local Devices tab

Group properties:

You can add devices to an existing group of 5" or 7" In-Wall Touch Screens, 7” In-Wall Touch Screen with Camera, 7” Portable Touch Screen with Camera, Door Station, or 7” In-Wall, 10” In-Wall, and 7” Tabletop T3 Touch Screens. This lets the caller from one touch screen send out a call to the group of devices.

To add or remove devices in a group:

  • Add: Select the device in the Local Devices tab, and then click Add. Click OK.

    • - OR -

  • Remove: Select the device in the right box of the Local Devices tab, and then click Remove. Click OK.

Device Properties:

To change device properties for the touch screens in the Intercom Group:

  1. Use the Local Devices tab to change the settings for all supported touch screens in the Intercom Group.
  • Manual Answer Timeout (seconds)—Use the up or down arrow keys or enter how much time is allowed to answer an incoming call.
  • You can set the intercom device order by selecting the device and clicking the Move Down or Move Up buttons.
  1. Click Apply Changes when you're finished.