Create an Install on a USB device

These steps show you how to create an install to a USB device attached to your computer’s hard drive and use the same USB device to install your customer’s system without an Internet connection.

Prerequisites

  • Have a USB drive handy, formatted for FAT32 with at least 2GB (OS 2.2.2 or earlier) or 4GB (OS 2.2.2 or later) total available disk space.
  • Only installs for OS 1.7.4, 1.8.2, 2.1 or later can be created using this procedure. Note: This creation procedure does not work on OS 2.0.x releases. If you are creating an install using an older software version, refer to USB Stick Creator White Paper at control4.com on the Knowledgebase to create the install.
  • A valid license on the controller to be updated.

To copy an install to a USB device:

  1. Open a browser and go to dealer.control4.com.
  1. Log in as the dealer.
  2. Go to Support > Software Updates > USB Installer.
  3. Click on the USB Install Creator program.
  4. Follow the instructions in the USB Stick Creator White Paper (located next to USB Installer) to complete the process.
  5. Connect the USB drive to your customer’s system using Composer Pro, and then follow the instructions in the USB Install White Paper.