Connection design tips for CentralizedLighting

Because there could be potentially many devices in a Centralized Lighting solution, making the proper connections between the modules and loads is key to efficient Centralized Lighting design. It will require some practice and trial and error on each project to get the system designed the way you want it.

Keep these things in mind:

• Each module ideally should use all channels and be close to the maximum wattage allowed. This must be traded off, however, against certain realities; for example, arc-fault breakers, numerous small loads, and very large loads.
• Whenever possible, put the loads in the same room on the same module. This allows each module override scene to control loads that would be grouped together logically.
• When using multiple panel/module installation locations, connect loads to modules in a nearby location to minimize long wiring runs.