Configuring a Zigbee mesh controller

You can use System Design to check the project properties, enable a Zigbee mesh controller, and view the status of the Zigbee mesh controller running in a Control4 project.

Note: A Zigbee network requires an HC-800, CORE, EA, or CA-1 controller.  

To configure a Z-Wave controller:

  1. In the Project Tree, select the Project Name (top line of the project tree) object for the project properties to appear.

  1. Click on the Zigbee Configuration tab.

  2. Click Edit Zigbee Configuration.

  1. In the Zigbee Server selection menu, choose the controller to run the Zigbee mesh.

  2. Select the channel in Zigbee Channel.

  3. Click OK to save the configuration and wait a few minutes for the Zigbee server to come online.

Note:For more information, see the Zigbee Best Practices at ctrl4.co/zigbee-bp.