Configure System Remote Control SR-150B

Use the System Design and Connections views to add and identify this device.

Ensure that the SR-150B is installed as directed in the Control4 System Remote Control SR-150B Setup Guide.

To add and configure an SR-150B:

  1. To add the driver and identify the device see “How to add devices to a project.” Ensure that the System Remote Control SR-150 driver is added to the project tree. 
  1. (Optional) To configure the properties, click System Design.
  1. In the project tree, select the System Remote Control object.
  1. View and change the properties in the Properties pane. 

    2. Note: Press any button on the system remote control to display the configurable property values in the Properties pane. Because the SR-150B has no window, some of the options below are not supported in the SR-150B. 

Modifiable properties include:

  • Screen Backlight—Not used.
  • Keypad Backlight—Lets you set the light level of the backlight. The default is 0%. Click Set Level.
  • Sleep Mode—Lets you configure sleep mode settings. The default is five seconds, but can be extended to 60 seconds. Select Wake on Movement if you want the remote control to wake up when moved.
  • Batteries—Lets you view the battery level on your remote control.
  • Enable Recharge Station—Check this box if you received a Remote Recharging Station with a remote. This feature updates your existing remote to recognize the new rechargeable battery.
  • Network—Lets you view the remote control’s Zigbee channel, gateway, MAC address and firmware version.
  • MAC—Displays the remote’s own MAC address.
  • Firmware Version—Displays the current firmware version of the remote control.
  • Watch/Listen Button Behavior—If you select one of the options below, the following action occurs when you press the Watch button.
  • No Action—When you press the Watch button, nothing happens. This option can be tied to programming a button (see the section below).
  • Select Most Recently Used Device—Lists the last three devices (for example, DVD player, media player, television).
  1. Change the system remote control settings as needed at the physical system remote control SR-150B using the applicable button-press sequence:
  • Check Zigbee Channel—To determine the current Zigbee channel, press Room Off, 0, 0, 3 (or Room Off, 7, 4, 7) (in that order), and then count the blinks of Room Off. The number of blinks corresponds with the channel number.
  • Reset to Factory Defaults—To reset all settings to the factory defaults (including Zigbee channel), press Room Off, 9, 9, 9.