Configure a 7” or 10” T3 Series In-Wall Touch Screen

Use the System Design and Connections views to add and configure this device.

To add and configure a T3 in-wall touch screen to a project:

  1. Add the C4-WALL7 or C4-WALL10 In-Wall Touch Screen driver to your project.
  1. To configure the properties, click System Design.
  1. In the project tree, select the T3 7" or T3 10" In-Wall Touch Screen.
  1. View and change the properties in the Properties pane as needed.

    2. Properties include:

    • Network Connection—Reports the touch screen’s current network connection type.
    • Back Light—Use the arrows or type numbers to set the light level, then click Set.

    Advanced properties include:

    • Enable Camera—Allows you to enable or disable the camera.