Centralized Lighting

Centralized Lighting lets you install a lighting control central panel in a mechanical room for new construction. Along with terminal blocks, the 8-Channel Dimmers, 8-Port Ethernet switches, 8-Channel 0-10V Dimmers, and 8-Channel Relay modules can be installed in these panels and connected to dimmers and switches in all rooms of the house. With any Navigator, you can control lights in any room or in the entire house, while eliminating wall clutter.

The products in the Centralized Lighting family include:

  • 5-Slot Panel (C4-DIN-5PAN)
  • 2-Slot Panel (C4-DIN-2PAN)
  • 8-Channel Dimmer (C4-DIN-8DIM-E)
  • 8-Port Ethernet Switch (C4-DIN-8ESW-E)
  • 8-Channel Relay (C4-DIN-8REL-E)
  • 8-Channel 0-10V Dimmer (C4-DIN-8TV-E)
  • Bus Power Supply (C4-DIN-BPS)
  • Bus Ethernet Gateway, DIN Rail (C4-DIN-BEG)
  • 4-Channel Bus Dry Contact Input (C4-BDCI4)

Each device you install needs to be:

  1. Added to the project.
  1. Identified (except for the panels and 8-Port Ethernet Switch).
  1. Configured.

See the following sections for details. Configure the light properties first (next section), and then configure each of the modules after that.

To learn how to design, plan, set up, and install the Centralized Lighting products, see the Centralized Lighting information under Lighting on the Dealer Portal.

Tip: Use the Advanced Lighting Scenes and Light Properties agents with Centralized Lighting.

Tip: Also refer to “Configuring user interfaces” for Centralized Lighting keypad configurations.