Add the IR driver to the project tree

After you create an IR driver using the Driver Wizard, you must add it to the Composer Pro project tree. This section uses the Samsung TXP1430 as an example.

To add the IR driver to the project tree:

  1. Start Composer Pro and connect to a Director.
  1. Click System Design.
  1. In the project tree, remove the existing television driver that you previously added to the example project (if it was added).
  1. From the Search tab, use the drop-down menu to select the Device Type and Manufacturer of the driver you just created.

    2. Example:

  1. At Device Type, select Television.
  1. At Manufacturer, select Samsung.
  1. Double-click the new driver to add it to the project tree. Example: Samsung TXP1430.
  2. Make the connections. See “Connect the devices for IR control.”