Adding keypad and electrical interfaces

After adding a controller, you can add dimmers, switches, keypads, outlets, and a remote control.

To add keypad interfaces: 

1. In the System Design pane’s project tree, select the Theater room.

2. In the My Drivers tab, do the following: 

1. Under Lighting > Light (v2), double-click Adaptive Phase Dimmer to add it to the project, and then rename it to Dimmer in the project.

2. Under Lighting > Light (v2), double-click Switch, and then rename it to Light Switch.

3. Under Lighting > Light (v2), double-click Wireless Outlet Switch, and then rename it to Television Outlet Switch.

4. Under User Interface, double-click System Remote Control.

5. Under User Interface, double-click Configurable Keypad.

Tip: Use a descriptive name for items added to a project. You can right-click and select Rename, or you can begin typing right after the item is added. For example, if you have two dimmers in a room, you could name one “Wall Dimmer” and the other “Ceiling Dimmer.” This helps you clearly identify items later when making connections.