PREREQUISITES

• Control4 system running OS 3.2 or higher
• For the PoE model (C4-VDB-E)—Cat5e/6 or better wiring to PoE injector or PoE switch (802.3af PoE, injector not included)
• If you want to use the external chime feature, a doorbell chime, doorbell transformer, and 18-22 gauge 2-conductor wire to the doorbell chime are required.
• The waterproof Ethernet connector assemble requires a 1” passthrough hole and space in the wall cavity behind the bracket. If you are not using the doorbell wall box, make sure there is plenty of room behind the metal bracket.

CONTENTS

• Video Doorbell (PoE) (C4-VDB-E)
• Mounting bracket
• Wood screws (3) and anchors
• Set screw (2) and Allen-type wrench

IMPORTANT NOTES AND CAUTIONS

Important! Installation and maintenance should only be performed by qualified technicians.

Important! The VDB should only be connected to a properly secured network.

Caution! Use with a power supply that is UL listed and Limited Power Source (LPS) certified. The power supply should bear the UL listed and LPS marks. The power supply should also meet any safety and compliance requirements for the country of use. The power supply should be properly grounded.