Installation and Wiring
Installation
B-660-MTRX-8x8 occupies 1U space and can be placed on a solid and stable surface or installed in a standard equipment rack.
To install the matrix in an equipment rack perform the following steps:
-
Attach the installation bracket to the enclosure using the supplied screws.
-
Attach the bracket to the enclosure as shown below.
-
Repeat steps 1 and 2 for the other side of the unit.
-
Mount and affix the unit in the rack mount with the mounting screws.
Wiring
Warning: -Disconnect the power from all devices before wiring. While wiring, connect and disconnect the cables gently.
To wire the device, perform the following steps:
-
Connect HDMI IN: Connect the HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc.) to the HDMI IN 1-8 of the Matrix.
-
Connect HDMI OUT: Connect HDMI display device (such as TV, projector, LED/LCD display) to the HDMI OUT 1-8.
-
Connect AUDIO OUT: Connect audio devices to AUDIO OUT 1-8 of the Matrix (e.g. audio amplifier).
-
Connect for additional control options:
-
LAN Control (Telnet/Web UI): Connect a Local Area Network to the LAN port of the Matrix.
-
RS-232 Control: Connect a control PC or control system to RS-232 port of the Matrix.
-
IR Control: The IR Remote provided is for controlling the Matrix through IR signal.
-
-
Connect the supplied AC power cord to the Matrix.
-
Power on all connected devices.