AN-x20-AP-I/O

Wi-Fi 6 Access Point Software Manual

This manual details the web user interface and configuration of Araknis x20 series access points (APs)

First time setup tips

This AP requires 802.3at (30W) PoE. Do not use 802.3af (15W) or a passive PoE injector as 15W is only enough to power the device, connect to OvrC, and broadcast an SSID with minimal throughput.
For jobs with multiple APs, consider using OvrC to configure the SSIDs for all APs at once. See Getting Started With OvrC Wi-Fi Management for more information.
All Araknis access points transmit the same default SSID, araknis_initial. If multiple access points are being installed in the same network, without using OvrC for SSID setup, power on and configure one AP at a time to avoid confusion about which access point you are connecting to.
Araknis Networks recommends the use of MAC reservations, instead of static IP addresses.
You must change the login credentials during initial setup.

Copyright © 2023, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.