Control4 System User Guide

Using the List Navigators

Use the Control4® System Remote Control list navigation window to perform some, but not all of the functions that you can perform using the touch screens or on-screen Navigators. Note: The System Remote Control SR-150 does not have a window, so it cannot display a list.

 

To use the System Remote Control's List Navigator:

  1. On the SR-250, press the List button. The Room, House, Lights, Music, and Videos options appear.
  2. Use the arrow keys to move through and use these options. The table below lists some examples of what you would see:

 

Main Option 2nd Option 3rd Option Description/Action
House Location Rooms (listed individually) Loads the room.
  Contacts Motion Sensor, Doorbell, and so on. Lists the Contacts in  the system.
  Relays Relay, Motorized Screen, Electronic Gate, and so on. Lists the status of the Relays in the system. Select to activate.
Lights Lighting Scenes Evening Lights Lists the Lighting Scenes created for the system. Select to activate.
  Dimmers Dimmer name Lists the Dimmers created in the system. Select to turn on or off. To dim, press Select, use arrow keys to dim, press Select again.
  Switches Switch name Lists the Switches created in the system. Select to turn on or off.
Music Zones Zone name(s) Lists the zones created. Select to enable or disable.
  Edit playlist Select song. Choose Play Now or Remove from Queue.
  Artist/Album    
Videos Browse All, Genre, Director, Actor, Rating Lists videos by category. Select to view.
  Television Television Select to watch.
TV Channels Channel number Lists channel entered. Select the channel to watch.
  Television Television Select to watch.
  Movies    
Radio Stations Station list List the stations created. Select to listen to a station.
  Tuner Tuner Select to enable Tuner.
  Receiver Receiver Select to enable Receiver.
  Satellite Channel number  Select the channel to watch.
Comfort Thermostat Current Temp, Heat and Cool Set Points, Mode. Select an option to change the settings.
  Blinds Blind name(s) Lists the blinds in the system. Select to raise/lower.
 

Contacts

Contact name(s) Lists the Contacts in the system.
  Relays Gas Fireplace, Fireplace Switch, etc. Lists the status of the Relays in the system.
Info Watch Television Select to watch TV.
  Listen Tuner, Receiver, Stations, Zones Select to enable.
  Help AV Help Wizard, AV Device Control, Programmable Button Assistance for devices and programmable buttons. Select to choose a device, button, or to answer questions.
  Config Display Brightness, Keypad Brightness, Motion Detect, Battery Level Select to change configurations.
  About View firmware version, date, and time.  

 

 

For more information, see the System Remote Control SR-250 User Guide on the Customers > Products page at www.control4.com.

 

  1. Press Select to make your selection.
Related Topics:

Control4 System Remote Control SR-250 User Guide

See Also:

Control4 System Quick Start Guide

 

 

  ® 2013 Control4 Corporation. Corporate website: http://www.control4.com.